Latest News

Add Horsepower to 2008 to 2014 Honda Accord and Crosstour with K&N Air Intake

28 Apr 2009

The 2008 Honda Accord V6 received an extensive redesign inside and out. It is sold with a powerful 3.5 liter V6 engine which the manufacturer bills as having advanced fuel-saving technology.

K&N air intake system for 2008 to 2014 Honda Accord and Crosstour with a 3.5L

2008 Honda Accord at K&N headquarters in Riverside, California

K&N has designed an air intake system, part number 69-1210TS which adds to your Honda’s performance. K&N performance air intake systems are designed to provide the best balance of airflow and filtration. The 69-1210TS features an aluminum powder coated silver tube and a K&N round tapered chrome top universal air filter (RC-4630) to replace your Accord's airbox.

69-1210TS K&N air intake system installed in 2008 Honda Accord

Dyno chart for Honda Accord with a 3.5 liter V6 engine

Our cold air intake systems are built for horsepower. We establish a stock baseline horsepower with our in house dynamometers. From there we work to get the largest horsepower gain attainable without causing a check engine light to be tripped. Our horsepower numbers are not based on the single biggest gain from one particular vehicle but are based on an average of dynamometer runs from several vehicles.

K&N dynamometer tests show a 10.23 horsepower gain at 5217 RPM on the 2008 Honda Accord V6.

The heat shield assembly is installed into the engine compartment using the factory mounting points. Edge trim and brackets are provided. The heat shield isolates engine heat and allows the K&N air filter to receive a consistent flow of fresh air.

K&N air intake systems are easy to install in 90 minutes or less. K&N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to our air intake systems. Our products are well engineered, built with the finest materials and we stand behind them 100 percent.

The K&N air intake 69-1210TS will fit the following vehicles:

2014 ACURA TL 3.5L V6
2013 ACURA TL 3.5L V6
2012 HONDA CROSSTOUR 3.5L V6
2012 HONDA ACCORD 3.5L V6
2012 ACURA TL 3.5L V6
2011 HONDA ACCORD CROSSTOUR 3.5L V6
2011 HONDA ACCORD 3.5L V6
2011 ACURA TL 3.5L V6
2010 HONDA ACCORD CROSSTOUR 3.5L V6
2010 HONDA ACCORD 3.5L V6
2010 ACURA TL 3.7L V6
2010 ACURA TL 3.5L V6
2009 HONDA ACCORD 3.5L V6 F/I - Exc. LEV2 SULEV Test Group 9HNXV03.5EC3
2009 ACURA TL 3.7L V6
2009 ACURA TL 3.5L V6
2008 HONDA ACCORD 3.5L V6 F/I - Exc. LEV2 SULEV Test Group 8HNXV03.5BMC
2008 ACURA TL 3.5L V6
2007 ACURA TL 3.5L V6

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2007 through 2012 Nissan Altima Owners Gain Estimated 9.36 HP with K&N Air Intake

28 Apr 2009

K&N has designed an air intake system (69-7062TTK) in black for the 2007 to 2012 Nissan Altima 3.5 liter V6 engine. K&N dynamometer tests show an estimated 9.36 horsepower gain at 4300 RPM for this air intake kit.

K&N's 69-7062 cold air intake system for the Nissan Altima with a 3.5 liter V6 engine

Nissan Altima with a 3.5 liter V6 engine

K&N air intake systems are designed to reduce intake restriction and at the same time, smooth and straighten airflow while providing excellent filtration.

K&N air intake system 69-7062 installed in 2007 Nissan Altima

Dyno chart for Nissan Altima

The K&N round tapered universal air filter (RU-4990) is protected by a heat shield which comes with edge trim. The heat shield aids the K&N washable and reusable universal air filter in receiving a consistent flow of fresh air.

K&N's air intake design works with factory computer settings. Simply remove the factory air box assembly and replace it with the 69-7062TTK. The mass air sensor adaptor is precision CNC machined for accurate mass air flow sensor readings.

With a K&N performance air intake system, drivers can count on extra horsepower whether driving around town, commuting or taking the family out. In fact K&N guarantees more horsepower!

It takes about 90 minutes to install this air intake and it is covered by K&N’s Million Mile Limited Warranty.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Young Sisters of Fast Chicks Racing Work Hard for Results in Junior Dragster

28 Apr 2009

Fast Chicks Racer Emma Ballard thanked Bob Harris of K&N for sponsorship with this hand written letter.

Fast Chicks Racer Arley Ballard also put pencil to paper for K&N.

All little girls have dreams, some want to be princesses while others want to be queens on the racetrack. Two little girls from Byron, Illinois dreamed of racetracks and fast cars without a fairy godmother. Instead they have a father and mother who taught them hard work pays off.

Fast Chicks Racing Team sisters Arley and Emma Ballard take on competitive Junior Dragster Class

Emma Ballard is 13-years-old and her sister, Arley is 8-years-old. They are drag racers and they are Fast Chicks Racing. Emma is starting her fourth season in Junior Dragster and Arley's first race will be at Byron Dragway.

"I used to race motorcycles, but now it's my two girls turn to race," said Mike Ballard. "We took Emma to all the tracks when she was a baby and she could not wait to get in a car. Now Arley is about to hit the tracks and she can't wait."

Emma has finished in the top 10 point standings in her division all three seasons she has raced. "Sponsorship is part of every racing deal," said Ballard. "I asked the girls to help secure sponsorships and they wrote letters to K&N and K&N responded for the 2009 season."

Fast Chicks Racing sisters continue the family tradition of using K&N products

Ballard has used K&N for more than 20 years. "I'm the owner of Fast Chicks Racing, I'm the bank and I'm the teacher," he said. "K&N makes the best filters on the market."

Fast Chicks Racing will try to hit 11 races this season. "It all depends on school and work schedules," said Ballard. "We will definitely hit 9 races. The other part of the deal is Emma and Arley have to keep their grades up and behave and have respect. I know they will because they are good girls."

Mike and his wife Jill are proud parents. "It's hard to put into words how I feel," he said. "The starting line brings out the butterflies, the adrenaline rush and the teary eyes."

The season is just beginning and Fast Chicks Racing is up and coming. They received a write up in their local newspaper and they received a sponsorship from K&N. Maybe they do have a fairy godmother.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Add 12.31 Horsepower to 2008 to 2010 Dodge Avenger with K&N Air Intake System

28 Apr 2009

The 2008 Dodge Avenger looks similar to a three-quarter scale Charger. It is a twin mechanically to the Chrysler Sebring and shares its powertrain.

K&N Engineering 69-2543TTK air intake system for the Dodge Avenger with a 3.5 liter V6 engine

K&N has developed a performance air intake kit (69-2543TTK) in black for the 2008, 2009 and 2010 Dodge Avenger with a 3.5 liter V6 engine. K&N dynamometer tests show a 12.31 horsepower increase at 5493 RPM.

K&N performance air intake system 69-2543TTK installed on a Dodge Avenger

Dyno chart for Dodge Avenger with a 3.5 liter engine

The K&N air intake design replaces the restrictive OEM intake for more power on the naturally aspirated engine. This K&N air intake kit replaces the original stock air box for a power gain you can immediately feel.

The 69-2543TTK features a K&N cone shaped air filter (RU-4730) which is placed in the front left corner of the engine. It is protected from hot engine heat by a powder coated heat shield. The RU-4730 is positioned so it gets fed cooler outside air which aids in the power gain.

The 69-2543TTK uses a CNC machined mass air sensor adaptor that is placed so the air intake system performs within factory computer settings.

This K&N air intake system can be easily installed in 90 minutes or less with simple hand tools. It is backed by the famous K&N Million Mile Limited Warranty.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Porsche's Street-Legal Race Car Receives a Massive 24 Horsepower Increase with K&N

28 Apr 2009

K&N air intake system installed in 2007 Porsche 911 GT3 RS with the 3.6L engine

Dyno chart for 2007 Porsche 911 GT3 RS with the 3.6L engine

Not since 1973 has Porsche's legendary RS name plate been available in the U.S. market. In 2007 the 911 GT3 RS hit American soil once again, creating much excitement among racing enthusiasts. The 911 GT3 RS has been described as a street-legal racecar intended as a homologation model for a range of racing series. Wearing a celebrated name like Porsche means the 2007 GT3 RS won't disappoint and neither will K&N's Performance Air Intake System, part number 57-7001.

K&N's 57-7001 Performance Air Intake System for the 2007 Porsche 911 GT3 RS 3.6L H6

2007 Porsche 911 GT3 RS

With the addition of K&N's new Performance Air Intake System, part number 57-7001, GT3 RS owners can realize a gain of nearly 25 horsepower at the wheels! K&N's Research and Development Department tested a 2007 Porsche 911 GT3 RS 3.6L H6 on our in-house dynamometer. Results showed an increase of 24.65 horsepower @ 6726 RPM. K&N's 57-7001 provides increased performance while maintaining that "O/E" look with a rotationally molded high-density polyethylene tube.

K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten airflow. This allows your engine to pull in air with ease compared to the OEM air filter assembly. More air means more power and torque when you need it. With a K&N Performance Air Intake System, consumers can count on extra horsepower whether driving down the Las Vegas strip, or twisting through the famous "Corkscrew" at Laguna Seca.

The 2007 GT3 incorporates ultra lightweight materials throughout. Keeping with the carbon fiber theme, the 57-7001 air intake system uses a conical shaped, carbon fiber top, high-flow air filter (RP-5167) and powder coated two-piece aluminum heat shield in place of the vehicle's stock air box. The result is an air filter that captures harmful particles, flows more air, and increases service life. This K&N air filter performs for up to 100,000 miles before service is required depending on driving conditions. Improving the air path between the filter and the engine is the rotationally molded high-density polyethylene tube. It offers the most flexibility in design and outstanding horsepower numbers. 57-7001 takes about 90 minutes or less to install, with no cutting or drilling, and is covered by K&N's Million Mile Limited Warranty^™.

For increased protection and style, K&N includes Drycharger^® filter wrap part number RF-1037DK with this air intake. Drycharger^® filter wraps are made from a durable polyester material containing uniform micron openings which will stop small dirt particles and repel water; yet add little restriction to the airflow of your filter.

Find a K&N product for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer near you.

Previous Page 1 ... 815 816 817 818 819 ... 1064 Next Page