The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Toyota Camry has been in production since 1982 and is still one of the more popular vehicles today. Toyota came out with the 2012 model (XV50) in September 2011, replacing the XV40 series as the seventh generation of Camry. This model has a 2.5 liter, and 3.5 liter engine option. While the 2.5 liter is great for around town, some drivers may need a bit more power to get where they're going, choosing the 3.5 liter V6 model.
K&N has designed a High-Flow Performance Air Intake System to accommodate the V6 motor. The 69-8618TS is a custom designed air intake system allowing better vehicle performance and providing excellent filtration to protect your engine. It is built to dramatically decrease intake restriction by smoothing and straightening air flow. This allows the vehicle's engine to breathe easier than the OEM air box assembly resulting in more power and torque. The 69-8618TS fits 2012-2017 Toyota Camry models with a 3.5 liter V6 engine...
K&N Air intake installed on a 2012 Toyota Camry 3.5L
The cone-shaped air filter (RU-4990), included with the air intake, is washable and reusable. No more disposable air filter to replace over and over. Performance air filter RU-4990 can be used for up to 100,000 miles before cleaning is needed, depending on driving conditions.
This air intake system is also equipped with a heat shield to help deflect heat from the engine. It also comes with a low restriction aluminum tube with a silver powder coated finish custom designed for the Toyota Camry. Installation can be completed with the use of common hand tools in less than 90 minutes. K&N 69-8618TS includes step-by-step directions with detailed photos for easy installation .
Dyno results for a 2012 Toyota Camry 3.5L with air intake 69-8618TS installed
Even though the Camry isn't considered a high-performance car, you can still enjoy the extra horsepower a K&N Performance Air Intake System provides while enjoying the comfort, safety, and reliability of a Camry. K&N tested the 69-8618TS Air Intake on a 2012 Toyota Camry with a 3.5L engine and saw an estimated increase of 7 horsepower at 5914 RPM and 6.5 lbft of torque at 4,698 RPM. Best of all the 69-8618TS comes backed with K&N's Million Mile Limited Warranty so it will be that last air intake and air filter your Toyota Camry will ever need.
The K&N air intake 69-8618TS fits the following Camrys:
2017 Toyota Camry 3.5L V6
2016 Toyota Camry 3.5L V6
2015 Toyota Camry 3.5L V6
2014 Toyota Camry 3.5L V6
2013 Toyota Camry 3.5L V6
2012 Toyota Camry 3.5L V6
For a list of all K&N air intakes available for the Toyota Camry, visit the Toyota Camry Air Intakes page on KNFilters.com.
Not the vehicle you were looking for? Check out the K&N air intakes for Toyota Camry models page also on the K&N website.
Replacement Air Filter 33-2997 for 2012-2016 BMW models
The BMW M135i is the successor to the 1-series M coupe, which is out of production. The M135i is part of a line of Beemers called M Performance Automobiles, which are positioned as a midway point between full-bore M cars and regular production BMWs. Outside the United States the M135i is available in a three and five door hatch, but car buyers in the US fear not, in 2013 a two-door notchback coupe version has crossed the Atlantic and is available for U.S. customers.
The new model features an extremely impressive 3-liter, straight six-cylinder engine that produces a remarkable 320HP. This permits the M135i to sprint from 0 to 60 mph in a mere 5.1 seconds and to reach a top speed of 155 mph (electronically limited). The BMW M135i's unique body styling has been specially designed to handle the impressive power delivered by its powerful engine. The M135i is in fact the most powerful derivative of the second-generation 1-series.
Whether you are looking to own the M135i, 2013 ActiveHybrid 3 or any of the other five select BMW models listed below, your Beemer can see performance gains by simply upgrading to a K&N 33-2997 reusable air filter. Designed to fit directly into the existing BMW air box, this high flow air filter is engineered to increase horsepower and acceleration, while providing outstanding filtration and engine protection.
Flow testing results for part number 33-2997
The 33-2997 is washable and reusable, making servicing as easy as following the simple cleaning instructions in a K&N Recharger Service Kit. Depending on your driving circumstances, performance air filter 33-2997 can go up to 50,000 miles before cleaning is necessary. With K&N's renowned Million Mile Limited Warranty , this will be the last air filter you'll ever purchase for your Beemer.
2016 BMW M235I XDRIVE 3.0L L6
2016 BMW M235I 3.0L L6
2016 BMW M2 3.0L L6
2016 BMW M135I 3.0L L6
2016 BMW I8 1.5L L3
2016 BMW 435I XDRIVE GRAN COUPE 3.0L L6
2016 BMW 435I XDRIVE 3.0L L6
2016 BMW 435I GRAN COUPE 3.0L L6
2016 BMW 435I 3.0L L6
2016 BMW 335I GT XDRIVE 3.0L L6
2016 BMW 335I GT 3.0L L6
2015 BMW M235I XDRIVE 3.0L L6
2015 BMW M235I 3.0L L6
2015 BMW M135I 3.0L L6
2015 BMW I8 1.5L L3
2015 BMW 435I XDRIVE GRAN COUPE 3.0L L6
2015 BMW 435I XDRIVE 3.0L L6
2015 BMW 435I GRAN COUPE 3.0L L6
2015 BMW 435I 3.0L L6
2015 BMW 335I XDRIVE 3.0L L6
2015 BMW 335I GT XDRIVE 3.0L L6
2015 BMW 335I GT 3.0L L6
2015 BMW 335I 3.0L L6
2014 BMW M235I 3.0L L6
2014 BMW M135I 3.0L L6
2014 BMW I8 1.5L L3
2014 BMW ACTIVEHYBRID 3 3.0L L6
2014 BMW 435I XDRIVE 3.0L L6
2014 BMW 435I 3.0L L6
2014 BMW 335I XDRIVE 3.0L L6
2014 BMW 335I GT XDRIVE 3.0L L6
2014 BMW 335I GT 3.0L L6
2014 BMW 335I 3.0L L6
2014 BMW 235I 2.0L L4
2013 BMW M135I 3.0L L6
2013 BMW ACTIVEHYBRID 3 3.0L L6
2013 BMW 435I 3.0L L6
2013 BMW 335I XDRIVE 3.0L L6
2013 BMW 335I GT 3.0L L6
2013 BMW 335I 3.0L L6
2012 BMW M135I 3.0L L6
2012 BMW 335I 3.0L L6 F/I - US, F30 Sedan
2012 BMW 335I 3.0L L6 F/I - Non-US, F30/F31
Replacement Air Filter for 2011-2016 Audi A6/A7 Sedans
The Audi A7 Quattro is a sedan with a coupe-style roof and every German luxury carmaker has been producing their interpretation. The idea is to draw together the practicality of a sedan, while representing the sleek styling cues of a coupe. Since its debut last year the A7 immediately took its rightful position at the head of that class. For 2013 the Audi A7 returns with only minor cosmetic changes.
Restriction data for part number E-1983
All North American 2013 A7 models are powered by a supercharged 3.0-liter V6 that produces 310 horsepower and 325 pound-feet of torque. There is also an A7 2.8L V6 version available in many locations other than the U.S. An eight-speed automatic transmission delivers power to all four wheels of these vehicles which makes for an exemplary balance of luxury and performance.
The A7 as well as the Audi A6 are statement cars designed to perform, and the K&N
E-1983 replacement air filter is engineered to help them perform even better. This air filter is custom made to fit directly into your existing factory air box and it is not only designed to increase horsepower and acceleration while providing outstanding filtration, it will also be the last air
Side view of E-1983
filter you’ll need to purchase. The E-1983 is washable and reusable and servicing a K&N air filter is as simple as following the K&N Recharger Service Kit instructions. Depending on your driving conditions, servicing intervals can run up to 50,000 miles before cleaning is necessary. Plus, the E-1983 replacement air filter is backed with K&N's renowned Million Mile Limited Warranty .
2016 Audi S7 4.0L V8
2016 Audi S6 4.0L V8
2016 Audi A7 Quattro 3.0L V6
2016 Audi A7 Quattro 3.0L V6 Diesel
2016 Audi A7 3.0L V6
2016 Audi A7 3.0L V6 Diesel
2016 Audi A6 Quattro 3.0L V6
2016 Audi A6 Quattro 3.0L V6 Diesel
2016 Audi A6 3.0L V6
2016 Audi A6 3.0L V6 Diesel
2015 Audi S7 4.0L V8
2015 Audi S6 4.0L V8
2015 Audi S6 3.0L V6
2015 Audi A7 Quattro 3.0L V6
2015 Audi A7 Quattro 3.0L V6 Diesel
2015 Audi A7 3.0L V6
2015 Audi A7 3.0L V6 Diesel
2015 Audi A6 Quattro 3.0L V6
2015 Audi A6 Quattro 3.0L V6 Diesel
2015 Audi A6 3.0L V6
2015 Audi A6 3.0L V6 Diesel
2014 Audi S7 4.0L V8
2014 Audi S6 4.0L V8
2014 Audi A7 Quattro 3.0L V6
2014 Audi A7 Quattro 3.0L V6 Diesel
2014 Audi A7 Quattro 2.8L V6
2014 Audi A7 3.0L V6
2014 Audi A7 3.0L V6 Diesel
2014 Audi A7 2.8L V6
2014 Audi A6 Quattro Rs6 3.0L V6 Diesel
2014 Audi A6 Quattro Rs6 2.8L V6
2014 Audi A6 3.0L V6
2014 Audi A6 3.0L V6 Diesel
2014 Audi A6 2.8L V6
2013 Audi S7 4.0L V8
2013 Audi S6 4.0L V8
2013 Audi A7 Quattro 3.0L V6
2013 Audi A7 Quattro 3.0L V6 Diesel
2013 Audi A7 Quattro 2.8L V6
2013 Audi A7 3.0L V6 Diesel
2013 Audi A7 2.8L V6
2013 Audi A6 Quattro 3.0L V6
2013 Audi A6 Quattro 3.0L V6 Diesel
2013 Audi A6 Quattro 2.8L V6
2013 Audi A6 3.0L V6
2013 Audi A6 3.0L V6 Diesel
2013 Audi A6 2.8L V6
2012 Audi S7 4.0L V8
2012 Audi S6 4.0L V8
2012 Audi A7 Quattro 3.0L V6
2012 Audi A7 Quattro 3.0L V6 Diesel
2012 Audi A7 Quattro 2.8L V6
2012 Audi A7 3.0L V6 Diesel
2012 Audi A7 2.8L V6
2012 Audi A6 Quattro 3.0L V6
2012 Audi A6 Quattro 3.0L V6 Diesel
2012 Audi A6 Quattro 2.8L V6
2012 Audi A6 3.0L V6
2012 Audi A6 3.0L V6 Diesel
2012 Audi A6 2.8L V6
2011 Audi A7 Quattro 3.0L V6
2011 Audi A7 Quattro 3.0L V6 Diesel
2011 Audi A7 3.0L V6
2011 Audi A7 3.0L V6 Diesel
2011 Audi A7 2.8L V6
2011 Audi A6 Quattro 3.0L V6 - From 9/11
2011 Audi A6 Quattro 3.0L V6 Diesel - From 9/11
2011 Audi A6 Quattro 2.8L V6 - From 9/11
2011 Audi A6 3.0L V6 Diesel - From 9/11
2011 Audi A6 2.8L V6 - From 9/11
2010 Audi A7 Quattro 3.0L V6
2010 Audi A7 Quattro 3.0L V6 Diesel
2010 Audi A7 3.0L V6
2010 Audi A7 3.0L V6 Diesel
2010 Audi A7 2.8L V6
K&N also offers Cartirdge Oil Filters to protect your Audi against harmful engine contaminants.
Sprint car air box part number 100-8559 with 2.75 inch air horns
In racing, winning comes down to driving skill, how well the vehicle is tuned and the performance products that are used to get every last 1/10th of a horsepower to the wheels. The importance of quality performance parts has contributed to K&N becoming a recognized name in race circles around the world.
2.5" air horn seal adapter part of K&N 100-8558
K&N has continued to work toward staying at the forefront of racing technology by providing more innovative and adaptable parts. It is out of this dedication that K&N is proud to release the 100-8558 and 100-8559 air box assemblies. Both of these assemblies come with the large washable and reusable 100-8564 air filter, the solid carbon fiber 100-8590 base, 6 spring clips, a set of 4 air horn seals and air horn seal attachment screws.
The difference between the two assemblies is the included air horn seal inside diameters. The 100-8558 comes with four 2-1/2" inside diameter air horn seal adapters and 100-8559 comes with four 2-3/4" inside diameter air horn seal adapters. To use the horn seal adapters, you cut out 4 oval openings, aligned to each set of injector stacks in the solid carbon fiber 100-8590 base and bolt each adapter to the carbon fiber base.
If an increase in airflow is what you are looking for, this high flow air box is your ticket.
The cotton air filter medium used in K&N air filters improves air flow with its
exclusive woven design. Not to mention, these assemblies are lightweight and extremely durable and a must for any racer currently using a traditional multi-Siamese fuel injection stack setup. In addition, with the two different air horn seal sizes, these two air box assemblies have a greater flexibility and versatility in use, fitment and function.
Carbon fiber sprint car air box base plate part 100-8590. This base plate comes with part 100-8558 and 100-8559.
Sprint car air box part number 100-8558 with 2.5" air horns
Each assembly is constructed from ultra-light weight carbon fiber. A Carbon Fiber Injector Stack Filter provides more than needed airflow while also providing the filtration and efficiency that K&N’s filter have become known for. Once the base and air horn seals have been put in place, simply slip the main filter assembly over the stacks and secure with the supplied spring clip clamps keep the filter securely attached for positive seal and ease of servicing.
These racing air filters are warranted against defective materials or workmanship for one year from date of purchase with no mileage limitation.
SEMA Featured Z/TA Trans Am Conversion Package Includes K&N Air Intake System
Chevy may have breathed new life into the Camaro, but modern day Trans Am lovers have had no such luck with a revival of the once revered American muscle car; until now. Doug Street owner of Projxauto offers a custom Trans Am appearance package that has additional performance options. "Our Z/TA Trans Am conversion package will fit any Gen 5 Camaro to date, 2010 -2013 V8 or V6 coupe or convertible," stated Street.
Doug Street Brought his two Z/TA Converted Camaro's for the SEMA Show
For the 2012 SEMA show in Las Vegas, Street brought two converted beauties to show off the designs and styling of Projxauto. "The two cars featured at the SEMA show were owned by Walters Ekland Chevrolet from Pennsylvania. We have built many Z/TA conversions for them." "We have been visiting and displaying different product at SEMA for approximately 12 years," said Street. "We can do a Z/TA conversion on a Camaro in about 1 weeks’ time." Specializing in automotive design and parts development focusing on plastics and body trim, this full body build is one of the largest builds available from Projxauto.
Yellow Camaro with Z/TA Trans Am Body Package at the 2012 SEMA Show
"The real inspiration for these modern day Trans Am's, mainly came from the fact that GM dropped the ball, and we feel there is still a strong desire to drive a modern day TA," said Street. "The obvious main modification, is the Z/TA Trans Am body package including a functional shaker scoop that feeds additional cold air into a K&N cold air intake system, followed by aftermarket wheels and a drop spring kit." When asked what the public thought about the conversion packages, Street mentioned that the vehicles are truly unique.
SEMA Featured Modified Z/TA Package on Black Camaro
"I would say that definitely the Z/TA package gets all the attention, after all this kit will transform an ordinary Camaro into a modern day Firebird that really doesn't exist. This kit will truly make your car stand out from the rest!" When asked why K&N was used in their modified Z/TA packages Street answered, "… we chose to [go] with K&N because we felt that they were the better engineered system on the aftermarket." " We actually decided t go with K&N during our product design and engineering stages. After evaluating a few other systems, we chose K&N, and then designed our functional shaker scoop system around the K&N system," said Street.
SEMA Vendor Projxauto Designs Interior and Exterior Body Panels and Trim
Featured in many articles and advertisements as well as bringing vehicles to shows around the North Eastern United States, Doug Street and Projxauto are hopeful to expand their market reach and grow to other areas of the country. "…we are an automotive design and engineering company, that has been designing interior and exterior body panels and trim for over thirty years, so we have applied all the disciplines from the OEM world into our product," said Street.
Projxauto Transformed an Ordinary Camaro Into a Modern Day Firebird for SEMA
"All of our parts are made locally and proudly in the Detroit area. We feel that this investment in design, engineering, tooling, and manufacturing sets our Trans AM package far in front of any other conversion on the market." For more information about Projxauto and their revolutionary conversions visit www.ztafirebird.com
