Latest News

Eric Norris prepares for the SRL Southwest Tour Series race at Kern County Raceway in Bakersfield.

Norris, the son of martial arts expert and actor Chuck Norris, was a veteran in the NASCAR Winston West Series, the predecessor of the K&N Pro Series West. He won his first West Series race in Bakersfield, at Mesa Marin Raceway.

Eric Norris continues to race, off-road trucks and open wheel cars mostly, and has been trying to put a deal together with Dave Reed Racing and his driving partner, Matt Stowe, for some time.

“I always do a couple races a year, maybe a road race somewhere,” Eric Norris said. “I’ve gone out to Cleveland, Mid-Ohio, a few times. Last year Matt and I did like three off-road races. I’m always doing something. I love racing so much, I don’t ever want to step away from it completely. I am always trying to find something to do.”

Eric Norris finished in 20th place in the Bulwark 150 by 51 Fifty Energy Drink at Kern County Raceway. Derek Thorn won the SRL Southwest Tour race. Twenty-six cars entered the race.

Eric Norris (14) races during the SRL Southwest Tour Series event at Kern County Raceway.

Fitting a stock car race into his schedule is tricky. Eric Norris works as a stunt coordinator. He has been working on the TV show “24” in Atlanta, Georgia, and finding time to take away from the show has been difficult.

“It’s hard for me to commit to anything,” Eric Norris said. “We have tried to do a couple of different things with Dave earlier in the year. It’s just hard for me to sit there are say I need this Saturday night off. Then I go and work somewhere and I can’t get away.”

When he put together the deal to race in the SRL Southwest Tour Series in Bakersfield, he had to ask the producers of the show to give him time off. He wanted to leave on Thursday and the race was on Saturday night.

“They were super cool about it,” Eric Norris said. “Everything just kind of worked out. The timing was right. Dave had his car available. I know Dave is going to do everything he can to give me the best equipment and the best people.”

As for his expectations for the race, Eric Norris said he was not sure how it would play out. He was not so concerned about winning the race, but wanted to be competitive.

Eric Norris entered the SRL Southwest Tour Series race in Bakersfield in a car backed by K&N.

Even though Eric Norris works as a stuntman and stunt coordinator in movies and television shows, and races off-road trucks and cars, he insists he is not looking for an adrenaline rush. Racing cars is how he gets his competitive juices flowing. It is a way for him to challenge himself in a competitive forum.

“I’m not a super big adrenaline junky that I like to go out and jump out of airplanes,” Eric Norris said. “Racing cars is a more competitive thing for me than adrenaline junky thing for me. I get the adrenaline obviously when you're sitting there getting ready to get the green flag, and you got those big butterflies. It’s all about passing the next guy," explained Norris.

"I’ve never been a huge adrenaline junky. That being said, I have done some big stunts, and I still do big stunts. I get those big butterflies and all that. But it’s more about doing a good job and doing something cool than, oh my God, I am going to jump out of this building.”

His goals for the race were pretty realistic, stay on the lead lap and hang with the race leaders.

“I don’t know what my goals are really,” Eric Norris said. “I’d love to sit there and run every lap and finish on the lead lap with everybody and be competitive. I want to go out and be competitive and race hard, be up there with the leaders.”

Eric Norris finished in 20th place in the SRL Southwest Tour Series race at Kern County Raceway.

“I haven’t been in a car in 10 years,” Eric Norris said. “I have to get acclimated in two days of practice. Dave is going to give me a good car and if everything works out, there’s no reason I can’t go run up front with the leaders.”

Eric Norris had plenty of top-notch support for the race. Three-time NASCAR K&N Pro Series West champion Eric Holmes was his spotter. Plus K&N provided support for Eric Norris and his team in the race.

“K&N brings a big company to the series. It is exciting to have K&N as part of the series and part of this whole program as a sponsor,” Eric Norris said. “It brings legitimacy, especially with the Southwest Tour, to have a such a great company as part of it. I am excited to be a part of it.”

The K&N PS-7037 cartridge oil filter has a pleated high-flow media that traps 99% of contaminants

Whether you have the 2016 Lincoln MKX with the 3.7-liter V6 engine or the 2015 Ford F-150 with the 3.5L Ecoboost, your engine deserves to be protected from hamrful foreign matter that can be floating around in your oil.

As mentioned, the K&N PS-7037 Pro Series cartridge oil filter is designed and engineered for 2015-2016 Ford F-150, 2015-2016 Ford Edge, and the 2016 Lincoln MKX.

The filter is specially designed to deal with conventional, synthetic, and blended oils and provides superior filtration that traps 99% of contaminants. The special design of the filter encourages high flow because oil filter restrictions have been reduced. It includes a pleated high flow media that offers higher capacity and reduced oil filter restriction and a nitrile rubber gasket.

Besides Pro Series cartridge oil filters, K&N also offers wrench-off and wrench-off heavy duty oil filters, motorcycle and ATV canister oil filters, marine oil filters, diesel oil filters, and reusable billet aluminum spin-on oil filters. Use the K&N application search tool to find the right products for your needs.

The K&N PS-7037 Pro Series cartridge oil filter is designed to fit the following vehicles:

2016 LINCOLN MKX 2.7L V6 Fuel Injection - All Models
2016 FORD F150 2.7L V6 Fuel Injection - All Models
2016 FORD EDGE 2.7L V6 Fuel Injection - All Models
2015 FORD F150 2.7L V6 Fuel Injection - All Models
2015 FORD EDGE 2.7L V6 Fuel Injection - All Models

One of four 2,500 hp aluminum Hemis that power the Git R Done pulling tractor

Now imagine four of these monster motors hitched together with the sole purpose of dragging a sled weighing nearly a quarter of a ton about the length of the football field. Welcome to the world of competitive tractor pulling.

The routes of tractor pulling go back to when farm implements were pulled by horses, and farmers would compete against one another to prove who had the most powerful animals. In some horse teams competed by pulling laden carts loads over a set distance. Eventually the competition evolved and horses would pull a weighted skid, with more weight added as competitors were eliminated. These events continue to this day with specially bred draft horses bred to have high strength for pulling heavy loads.

While horses continue to pull, motorized tractor competition began in 1929 at events at sites like Bowling Green, Ohio, which continues to be the site of the NTPA National Championship. Not unlike short track dirt racing during the period into the 1960s rules varied from state to state, and even county to county. The lack of ability for a team to compete less than 50 miles from home severely limited the growth of the sport.

Recognizing this limitation, representatives from eight states created a common set of rules and established the National Tractor Pullers Association (NTPA). In the early 1970s, most competitors used standard farm vehicles, with the motto, "Pull on Sunday, plow on Monday". There were two classes: stock tractors, which were commercially-available tractors as produced by manufacturer and modified tractors, which were basic tractor chassis powered by a virtually unlimited choice of engines.

Each pair of engines is connected at the crankshaft, but still fires as two V-8s

Besides the multiple engine configurations that the Correia family runs, motors as diverse as Russian helicopter and torpedo boat engines, Continental AV1790 M103 tank engines, or an Allison V-1710 V-12 aircraft engine from a WW II P-38 or P-41.

The father and son Git R Done team of Clarence and Jeremy Correia run their four-engine machine as two separate banks of V-8 engines, connected crank to crank. Power is then feed to an Engler Cross Box, whose function is to couple the left and right pairs of engines together.

The goal of a Tractor Pull is to overcome the weight that the tractor is dragging, and in doing so pulling it farther than any of your competitors. The diabolical part is that the sled isn’t static weight - it contains a a heavy box filled that is mechanically winched forward as the sled progresses down the course. Pulling this ever-increasing load overcomes the power of the tractor and it stops short, although on occasion one will reach the end of the course, which is known as a “full pull.” The distance from start to finish is measured in thousandths of an inch and the tractor that pulls the sled the farthest distance is declared the winner. If more than one competitor reaches the full pull mark, a pull-off is held to determine a winner. Sort of like drag racing with each car connected to a powerful spring back at the start line.

So what’s it like to make a run in a four-engine, 8000-lb., Unlimited Class tractor? Let’s have Jeremy walk us through it. “Since this isn’t a speed sport, you don’t need to jump on the gas. Instead you apply a light throttle for the first five to 10 feet and make sure your tires have sufficient grip.” Side note here. The tires are Firestone Puller 2000 and they’re designed especially for tractor pulls. Should you see one you’ll notice that they don’t have much of a tread as a farm tractor tire. This was done to reduce the amount of dirt thrown back against the skid, which would build up and add resistance. Back to Jeremy:

Power is transfered to the Earth through specially-designed Firestone pulling tires

“Weight transfer is another important factor, and I know that I’ve balanced the tractor just right when the front wheels are one foot off the ground. Higher and too much weight is being transferred, down on the ground is not enough.”

“In traveling the course of the run, even though my forward speed is only about 30 – 40 mph, the tires are spinning at 98 mph,” Jeremy added. “You put it all together like that and you’ve earned yourself a full pull.”

If you’re a fan of motorsports you owe it to yourself to check out a Tractor Pull at least once. Where other forms of racing have limited the horsepower of cars or the length of the venue, this is still the Wild West, where if you have a better idea, build it and come take on the rest.

The 57-1122 performance kit includes all that is needed for instant power

If you want to take your Glide or Road King to the next level, it’s time for you to bolt on one of the most impressive intakes on the market. The K&N 57-1122 performance intake can deliver some of the most substantial power gains your FL series Harley-Davidson® can get from a simple to install accessory.

The clean design of the 57-1122 intake enhances the look of the Harley FL line

We really want you to click on the dyno chart link on the 57-1122’s product page. You’ll see that the gains in both horsepower and torque are consistently and substantially higher than the stock intake over the entire RPM range. As you undoubtedly know, that means that the overall rideability of the bike will be fantastic – not only on wide-open freeway runs, but around town as well.

Installation of the K&N 57-1122 intake usually takes less that 90 minutes

Of course, the intake is completed with a K&N high flow filter. The filter incorporates layers of oil-impregnated cotton gauze that is free-flowing yet offers excellent filtration. The filter, which is backed by K&N’s famous 10-Year/Million Mile Limited Warranty, is fully washable and reusable. You will never need to buy another air filter for your Harley.

The 57-1122 is made in the USA and is fully legal in all 50 states. Browse through the application list below to match the intake to your ride, and consult K&N’s online application tool for all of your filter needs. Then go watch Electra Glide in Blue!

2014 HARLEY DAVIDSON FLHXS STREET GLIDE SPECIAL 103 CI - Exc. Lower Fairings
2014 HARLEY DAVIDSON FLHX STREET GLIDE 103 CI - Exc. Lower Fairings
2013 HARLEY DAVIDSON FLTRX ROAD GLIDE CUSTOM 103 CI - Exc. Lower Fairings
2013 HARLEY DAVIDSON FLHX STREET GLIDE 103 CI - Exc. Lower Fairings
2013 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 103 CI - Exc. Lower Fairings
2013 HARLEY DAVIDSON FLHRC ROAD KING CLASSIC 103 CI - Exc. Lower Fairings
2013 HARLEY DAVIDSON FLHR ROAD KING 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLTRX ROAD GLIDE CUSTOM 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLHX STREET GLIDE 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLHTP ELECTRA GLIDE POLICE 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLHRC ROAD KING CLASSIC 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLHR ROAD KING 103 CI - Exc. Lower Fairings
2012 HARLEY DAVIDSON FLHP ROAD KING POLICE 103 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLTRX ROAD GLIDE CUSTOM 96 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLHX STREET GLIDE 96 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLHTP ELECTRA GLIDE POLICE 103 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 96 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLHRC ROAD KING CLASSIC 103 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLHR ROAD KING 96 CI - Exc. Lower Fairings
2011 HARLEY DAVIDSON FLHP ROAD KING POLICE 103 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLTRX ROAD GLIDE CUSTOM 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLTR ROAD GLIDE 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHX STREET GLIDE 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHTP ELECTRA GLIDE POLICE 103 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHT ELECTRA GLIDE STANDARD 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHRC ROAD KING CLASSIC 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHR ROAD KING 96 CI - Exc. Lower Fairings
2010 HARLEY DAVIDSON FLHP ROAD KING POLICE 103 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLTR ROAD GLIDE 96 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHX STREET GLIDE 96 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHTP ELECTRA GLIDE POLICE 103 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 96 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHT ELECTRA GLIDE STANDARD 96 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHRC ROAD KING CLASSIC 96 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHR ROAD KING 96 CI - Exc. Lower Fairings
2009 HARLEY DAVIDSON FLHP ROAD KING POLICE 103 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLTR ROAD GLIDE 96 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLHX STREET GLIDE 96 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 96 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLHT ELECTRA GLIDE STANDARD 96 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLHRSE4 SCREAMIN EAGLE ROAD KING 110 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLHRC ROAD KING CLASSIC 96 CI - Exc. Lower Fairings
2008 HARLEY DAVIDSON FLHR ROAD KING 96 CI - Exc. Lower Fairings

An aerial view of Las Vegas Motor Speedway during a NASCAR Sprint Cup event

Then in 1970, a full-scale replica of the Indianapolis Motor Speedway was built in Ontario, California, about 30 miles west of Riverside. Unlike Riverside, it featured a 2.5 mile oval track, a 3.2 mile infield road course, and a full-on NHRA drag strip right down pit lane.

The crowds are close to the action at Las Vegas Motor Speedway's 1.5 mile oval

Rising from the ashes of Stardust Raceway located west of The Strip just off Flamingo (and is now a housing development), which closed in 1970 was the Las Vegas Speedrome. Built on the site of the current facility in 1972, the location was selected due its proximity to the Nellis Air Force Base, calculating that developers were unlikely to squeeze out a race track from such an undesirable site for housing or commercial development.

The Strip at LVMS hosts the annual K&N Horsepower Challenge for the top eight Pro Stock drivers

The Strip at Las Vegas Motor Speedway is one of the most popular venues in the NHRA Drag Racing Series. The event at Las Vegas is not only at a critical point in the season for competitors working on a championship run, but it’s also the site for the K&N Horsepower Challenge.

Earlier this year Greg Anderson won the Horsepower Challenge in his Summit Racing Camaro

In addition to the on track contest, fans also have a chance to win big during the K&N NHRA Horsepower Challenge. Starting in the next few months, fans can enter the K&N Horsepower Challenge Sweepstakes to try their hand at becoming one of eight lucky fans to win a trip for two to Las Vegas, Nevada and get the racing experience of a lifetime.

"The Bullring" at LVMS provides thrilling short track stock car action for local fans

The K&N Horsepower Challenge isn’t the only cooperation between K&N and LVMS, in fact K&N has been a sponsor of the facilities for 13 continuous years, a pretty lengthy period of time in the motorsports industry.

The global Red Bull World Champion Air Races make an annual stop at LVMS to wow the fans

To round things out, there's also an 11 turn karting track that can be utilized in six different configurations and a off-road course with variations to suit the needs of motocross to Baja qualifying, all right there at Las Vegas Motor Speedway.

The Electric Daisy Carnival is one of the largest electronic dance music events in the world

Perhaps the most unusual event held at the LVMS is the Electric Daisy Carnival, commonly known as EDC. It’s one of the biggest electronic dance music festivals in the world, with over 400,000 attendees. Featured are multiple stages with DJs spinning electronic dance music, full-size carnivals rides, circus performers, interactive art concepts,and large-scale art installations.

Whether you prefer the right seat or left, you won't forget the Richard Petty Experience

There are any number of other motorsports that have competed at LVMS, including drifting, rallycross, Baja qualifications, and virtually anything with an engine. So short of the LVMS staff constructing a lagoon to host the America’s Cup or even hydroplane racing, LVMS will remain one of the most versatile motorsports facilities on this continent.